Brother DK-2210 labels for Shopify

LabelCraft - barcode labels for Shopify that print at exactly the size you set.

The guarantees behind every label

Exact to ±0.1 mm

Every label prints at the size you set - measured, not approximate.

Never a silent failure

Overflow or a missing barcode always raises a visible warning before you print.

Whole dots in native ZPL

Native ZPL puts every bar on whole printer dots. Bars under 2 dots wide, or PDF EAN/UPC bars thinner than the GS1 minimum, raise a warning.

Blanks filled, fixes on request

We only write to your barcodes that were empty when we read them, unless you ask us to fix them.

Brother DK-2210 is the narrow 29 mm continuous roll - shelf-edge strips, cable wraps, small tags. Narrow is the operative word for barcodes: here is exactly what fits.

Exact size, in mm and inches

This is a continuous roll: 29 mm (1.14 in) wide, with no fixed label length. LabelCraft makes each label one page of the PDF, 30 mm (1.18 in) long, and each page comes out as one label once the printer driver is set for it: the Brother setup guide gives the settings on Windows. For another length, choose Other size… under Label size, then Continuous strip.

Will a barcode scan at this size?

EAN-13 / UPC-A: scannable, but tight. The barcode box is 26 mm against a 19.1 mm floor at 300 dpi - keep the box as wide as the label allows and scan a printed sample before a full run.
Code 128 (SKU barcodes): only up to 8 worst-case characters fit scannably at this width - longer SKUs drop below the scan floor. Print the product's EAN/UPC instead, or pick a wider label.

These verdicts come from the same pre-flight engine the app runs before every print: a barcode's narrow bars must be at least 2 dots wide at the template's DPI, so the floor is exact, not a rule of thumb. Longer explanation in minimum barcode size and why a barcode won't scan.

What prints it

A Brother DK size, for the QL printers - QL-800, QL-810W, QL-820NWB, QL-1100, QL-700, all 300 dpi native. A Brother TD takes standard thermal rolls, not DK rolls. LabelCraft checks the template's DPI against your printer's native resolution and warns when they do not match - see 203 vs 300 DPI.

Printing this format from Shopify

In LabelCraft, pick Brother DK-2210 (29 mm continuous) under Label size: the barcode box, the text autofit and the pre-flight checks above are already sized for this exact label. The free plan prints 200 labels a month - enough to validate the format on your own printer before it costs anything.

Install free - 200 labels per month →

More on sizes: the full label size chart, which label size do I need, the Brother setup guide - or contact LabelCraft support.

Related guides

Not ready to install? Try the no-install demo and measure a real label

Still stuck after this guide? Get help from a human